1. There is a problem with the quality of DTF film. Under the same consumables and the same production environment, if you change to another DTF film and the powder sticking problem is improved, one possibility is that the DTF film is of poor quality and unqualified; the other...
Suitable for digital transfer printing. The pattern after transfering has the same texture as PU glue, and the hand feeling softer than glue (30~50% softer than the pattern printed with oil-based coating film). Key technology - ink-absorbing release coating (3-in-1 function) can complete the three major needs of ink...
Haiyi DTf film The surface of the film is dry and clean, and can be easily peeled in the hot, cold and warm conditions. Major advantages: The pattern after ironing is like the texture of PU glue, the tensile resilience is strong and does not deform, and the feel is softer than...
Some customers will ask why the DTF Film of different manufacturers has color difference. This is because the DTF Film coating formula of different manufacturers is different, and color difference is normal. For example, the transfer printing film that is easy to tear is often matte, while brightly colored...
1. The hot stamping temperature is wrong, it must be adjusted to a suitable temperature. The hot stamping temperature of a pure cotton T-shirt is about 140-160. 2. The pressure of hot stamping is not enough, the pressure of hot stamping should be increased, the greater the pressure, the better...
Vacuum blister sublimation dumb film ink-absorbing coating (mobile phone case/blister sublimation transfer) film film Applied to vacuum sublimation film, film film, plastic digital vacuum stretchable plastic film, vacuum digital printing film for irregular products, such as mobile phone cases, special-shaped parts blister/injection molding and other sublimation transfer printing processes. It...
Hot stamping film is a plastic film that can withstand high temperature without deformation. It can also be used as a membrane switch in the electronics industry. (It will not deform under 100 degrees, and it will stretch a little at 150 degrees.) It is used as a base...
The double-sided heat transfer printing film has one more coating layer than the single-sided heat transfer printing film, so the double-sided DTF Film will be thicker, and the single-sided DTF Film will be thinner. Cold-tear DTF Film needs to wait until the printing film cools down before it can...
Heat transfer PET Film is a kind of composite material, which is mainly used to meet the needs of end customers for personalized hot stamping on clothes, glasses, mobile phones and so on. After the end customer chooses to customize the favorite pattern, peel the release film attached to...
